Over 100,000 Sold!

Setting up your Pod 2.0 takes less than 10 minutes and can be done yourself!

With our new flexis and stationary design, setup is easier than ever.

Over 100,000 Sold!

Setting up your Pod 2.0 takes less than 10 minutes and can be done yourself!

With our new flexis and stationary design, setup is easier than ever.

Or, follow these simple instructions

Unbox your Water2 filter

Unbox your Water2 filter

1/9

Unbox your Water2 filter. The contents are your Pod 2.0, smart buzzer and two flexible hoses.

Identify cold water pipe

Identify cold water pipe

2/9

Identify which pipe is your cold pipe. A trick we use is to run the tap and feel which pipe has hot water running through it (your cold pipe is the other one!).

Turn off water mains or stopcock

Turn off water mains or stopcock

3/9

Go to your mains water or stopcock and ensure the water is turned off. This is usually found in your utility room or cupboard.

Undo cold water pipe

Undo cold water pipe

4/9

Undo the cold water pipe which you had previously identified as the cold pipe, using a spanner. Don't worry if some excess water dribbles out.

Connect Flexis

Connect Flexis

5/9

Attach the flexis to the inlet and the outlet (order doesn't matter)

Activate smart buzzer

Activate smart buzzer

6/9

Activate the smart buzzer by inserting the battery and holding down the button for 3 seconds until you see a blue flash. The smart buzzer can attach on either the inlet or the outlet flexi.

Plug Flexi to Pod

Plug Flexi to Pod

7/9

Plug the flexi into the Pod. Make sure that the water goes from ‘in’ to ‘out’ as marked on the Pod head.

Run water for 3 minutes

Run water for 3 minutes

8/9

Just to flush out the system.

Drink & Enjoy

Drink & Enjoy

9/9

Taste the difference!

Unbox your Water2 filter

Unbox your Water2 filter. The contents are your Pod 2.0, smart buzzer and two flexible hoses.

Step

Identify cold water pipe

Identify which pipe is your cold pipe. A trick we use is to run the tap and feel which pipe has hot water running through it (your cold pipe is the other one!).

Step

Turn off water mains or stopcock

Go to your mains water or stopcock and ensure the water is turned off. This is usually found in your utility room or cupboard.

Step

Undo cold water pipe

Undo the cold water pipe which you had previously identified as the cold pipe, using a spanner. Don't worry if some excess water dribbles out.

Step

Connect Flexis

Attach the flexis to the inlet and the outlet (order doesn't matter)

Step

Activate smart buzzer

Activate the smart buzzer by inserting the battery and holding down the button for 3 seconds until you see a blue flash. The smart buzzer can attach on either the inlet or the outlet flexi.

Step

Plug Flexi to Pod

Plug the flexi into the Pod. Make sure that the water goes from ‘in’ to ‘out’ as marked on the Pod head.

Step

Run water for 3 minutes

Just to flush out the system.

Step

Drink & Enjoy

Taste the difference!

Step

Frequently Asked Questions

Yes! We even have a taste guarantee. If you don't taste the difference, send it back for a full refund!

Water2 is designed for a simple install, we like to aim for around 10 minutes!

Yes, the product has a 5 year warranty. Please ensure your Water2 is only connected to the kitchen cold tap and not any other appliances. On top of that we have our 100 day money-back guarantee!

Order before 3pm and it'll be sent that same day!

Water2 Tap Filter

  • Over 100,000 drinkers
  • Backed by science
  • 100-Day Money Back Guarantee

Over 100,000 UK homes